shape_C_1d.f90 Source File


This file depends on

sourcefile~~shape_c_1d.f90~~EfferentGraph sourcefile~shape_c_1d.f90 shape_C_1d.f90 sourcefile~forcad.f90 forcad.f90 sourcefile~shape_c_1d.f90->sourcefile~forcad.f90 sourcefile~forcad_nurbs_curve.f90 forcad_nurbs_curve.f90 sourcefile~forcad.f90->sourcefile~forcad_nurbs_curve.f90 sourcefile~forcad_nurbs_surface.f90 forcad_nurbs_surface.f90 sourcefile~forcad.f90->sourcefile~forcad_nurbs_surface.f90 sourcefile~forcad_nurbs_volume.f90 forcad_nurbs_volume.f90 sourcefile~forcad.f90->sourcefile~forcad_nurbs_volume.f90 sourcefile~forcad_utils.f90 forcad_utils.f90 sourcefile~forcad.f90->sourcefile~forcad_utils.f90 sourcefile~forcad_nurbs_curve.f90->sourcefile~forcad_utils.f90 sourcefile~forcad_nurbs_surface.f90->sourcefile~forcad_utils.f90 sourcefile~forcad_nurbs_volume.f90->sourcefile~forcad_utils.f90

Source Code

program shape_C_1d

    use forcad, only: rk, nurbs_curve

    implicit none
    type(nurbs_curve) :: shape

    !-----------------------------------------------------------------------------
    ! Setting up NURBS C-shape
    !-----------------------------------------------------------------------------

    !> Set a C-shape with radius 2.0 and center at [0.0, 0.0, 0.0]
    call shape%set_C(center = [0.0_rk, 0.0_rk, 0.0_rk], radius = 2.0_rk)

    !> Export control points to a VTK file
    call shape%export_Xc('vtk/shape_C_1d_Xc.vtk')

    !-----------------------------------------------------------------------------
    ! Creating C-shape
    !-----------------------------------------------------------------------------

    !> Generate the NURBS C-shape with a resolution of 100
    call shape%create(res = 100)

    !> Export the generated cirlce to a VTK file
    call shape%export_Xg('vtk/shape_C_1d_Xg.vtk')

    !-----------------------------------------------------------------------------
    ! Visualization using PyVista
    ! Note: PyVista is required for visualization. Install it using `pip install pyvista`
    !-----------------------------------------------------------------------------

    !> Show the control geometry and geometry using PyVista
    call shape%show('vtk/shape_C_1d_Xc.vtk','vtk/shape_C_1d_Xg.vtk')

    !-----------------------------------------------------------------------------
    ! Finalizing
    !-----------------------------------------------------------------------------

    !> Finalize the NURBS curve object
    call shape%finalize()

end program