program shape_C_3d use forcad, only: rk, nurbs_volume implicit none type(nurbs_volume) :: shape !----------------------------------------------------------------------------- ! Setting up NURBS C-shape !----------------------------------------------------------------------------- !> Set a C-shape with radius 2.0 and center at [0.0, 0.0, 0.0] call shape%set_C(center = [0.0_rk, 0.0_rk, 0.0_rk], radius1 = 1.0_rk, radius2 = 2.0_rk, length = 2.0_rk) !> Export control points to a VTK file call shape%export_Xc('vtk/shape_C_3d_Xc.vtk') !----------------------------------------------------------------------------- ! Creating C-shape !----------------------------------------------------------------------------- !> Generate the NURBS C-shape with a resolution of 100 call shape%create(100, 60, 10) !> Export the generated cirlce to a VTK file call shape%export_Xg('vtk/shape_C_3d_Xg.vtk') !----------------------------------------------------------------------------- ! Visualization using PyVista ! Note: PyVista is required for visualization. Install it using `pip install pyvista` !----------------------------------------------------------------------------- !> Show the control geometry and geometry using PyVista call shape%show('vtk/shape_C_3d_Xc.vtk','vtk/shape_C_3d_Xg.vtk') !----------------------------------------------------------------------------- ! Finalizing !----------------------------------------------------------------------------- !> Finalize the NURBS curve object call shape%finalize() end program